Introduction IPv6 is the recent version of the IP address that is designed to replace IPv4 due to its limitations. One of the essential components in computer networking is static routing. We can configure static routing in both IPv4 and IPv6. IPv6 static routes play a foundational role in smaller networks. It also helps beginners…
Embedded Event Manager or Cisco EEM is a software component of Cisco IOS that allows network engineers to automate networking tasks, respond to certain types of events, and improve the intelligence of Cisco networking devices. EEM detects real-time network event reporting and tracking. It automates different tasks by using applets and scripts. EEM is embedded…
In Previous articles, we covered about configuration of Cisco devices, and how we access and configure a device. We configured our device from the very beginning, such as how to ping a router or switch, or how to telnet a device through Python Script. Then we ran various commands on routers and configured vlans on…
Suppose I ask you to configure either OSPF, EIGRP, or RIP. If you configure it manually, then it will take time to complete its configuration. We can simplify it through Python script within a single execution. In this way, we can automate IP routing protocols. We will give an option to the user whether he/she…
In the last two articles about the Python netmiko library part 1 and part 2, we have discussed the basis of the netmiko library and its implementation in the article. In this article, we are focusing on “how to automate network” by modifying the netmiko library, introducing a few challenges to enhance your understanding. We…
In the previous article “How to Automate Network Access With Python Netmiko Library part-1”, we have called only one device at a time. But, this time, we will call more than one device at the same time in a single script to automate Network Access. We will mention device IP addresses in the list data…
We use the Python Netmiko Library to automate network access securely. Netmiko is a Python library that is used to build a secure remote connection with network devices using an SSH connection. Nemiko is not the default library in Python. you will have to install it manually in it. It is necessary to enable SSH…
Vlan stands for virtual local area network. Creating a VLAN is an important part of the configuration of a switch. n this article, we will write a script and run this script to create Multiple VLANs with Python script on a switch. We will perform this lab in EVE-NG software. Creating Management Cloud in the…
When a router is not directly accessible, we mostly use either SSH or telnet to configure a router. In this article, we will explore the use of Python script to establish telnet access to a router. We will be simulating this lab within GNS3 software. I directly connected GNS3 to my laptop (PC). It’s worth…
Network automation is becoming an essential part of computer networking. With the help of network automation, we use software to automate our daily tasks through Python script. Network automation helps us to configure our network from a centralized location. Here, we will write a script and then implement it on the networking device. We will…